Shop 7 , 30 Erindale Road, Balcatta W.A. 6021  - Phone : (08) 9240 8880 -  Fax : (08) 9240 6886

The Kimberley Kamper Mariner Pak is the most complete solution for the boating enthusiast in the industry.
There are 2 types of boat loader depending on the boat size and options. The outboard can be loaded onto a universal slide that loads into the Gulling Pak and has extra tie-down security with an outboard hood over the head of the motor. It slides in and is easily managed.

The folding boat trailer is stored in the collapsed state on the front of the Camper. It is a registrable trailer. The new Selecta-Swing-Away will take an outboard in the rear up to 25Hp including long shaft outboards.

the "Mariner Pak" can be added to either the Classic, Limited Edition or Platinum Model. This can be added retrospectively to the Limited Edition and Platinum Models as these 2 models ship with the reinforced Roof Rack to take the Mariner Boat Loader.

The folding boat trailer is placed in front of the Gullwing Storage Pak OR behind the Standard Front Storage Box in the Classic model. The folding boat trailer wheels are located in the Mariner boat loader which has increased gas strut capacity to the standard boat loader.

The trailer comes standard with a treg hitch and light board for road registration. Your boat can stay on the boat loader as you open the Camper and the outboard slide makes it easy to store and handle your outboard.

The full canvas awning and Mesh walls casn be fitted with the boat loader operational. The Bedroom and bathroom can be added without disturbing the boat loader (apart from opening and closing).

The Selecta-Swing-Away™ can be added with both the bedroom or bathroom canvas and the boat loader operational.

The boat loader is specifically designed to go to the ground at an angle. It allows you to walk comfortably between the camper and boat loader to pull the canvas down on the drivers side. It means that you will find it easier to set up the Kamper.

The Selecta-Swing-Away™ will take up to a 25hp outboard and it can be a long shaft.
 

The Gullwing Pack will take up to a 15hp outboard (not the Honda 15hp which is a derated 20hp in size).

The outboard can be loaded onto a universal slide that loads into the Gulling Pak and has extra tie-down security with an outboard hood over the head of the motor

The folding boat trailer is registerable and great for short distances.
 

Up to a 4.0 m boat can be carried on the
Mariner Boat Loader. The width between tie down points across the beam is 1750mm.
 

The folding boat trailer is placed in front of the Gullwing Storage Pak OR behind the Standard Front Storage Box in the Classic model.

Major Credit Cards Accepted (merchant fees may apply)