Shop 7 , 30 Erindale Road, Balcatta W.A. 6021  - Phone : (08) 9240 8880 -  Fax : (08) 9240 6886

$27,890
Plus delivery and licensing costs.

[Sports RV Model] [Pricing & Options] [Specifications] [Kamper Layout] [Canvas Layout] [Photo Gallery]

The Sports RV is a purpose built Sports Utility Camper designed to match the growing popularity of mid-range All Terrain Vehicles and 4 Wheel Drives. It is designed to go wherever these vehicles can safely go. It can handle off-road conditions in Australia and is also well suited to beach and coastal travel in sand and soft conditions.
The SportsRV is a lightweight trailer suitable for medium 4WDs and Sports Utilities.

The SportsRV can accept a purpose built Quad-Pod™ on the front. It can carry a large Quad Bike up to 350kg or 2 x Motor Bikes of approx 175kg each.

 The optional Selecta-Swing-Away™ Jerry Can holder positions the extra weight of up to 60litres of fuel in the rear.

This trailer needs a vehicle that can handle a drawbar weight of 200 – 220kg
The Camper function and the annex is the same as the standard SportsRV™ Model.

Sports RV has been designed for both the long term stay and the quick overnight stop.
For overnight stops, the camper opens in minutes accommodating 2 adults and 2-3 children in bunk beds on the hard floor.

For longer stays, the patented Bedouin Annexe erects without the use of ropes and covers an area 7m long and 3m wide.
Within this area is room for a second bedroom as well as the stainless steel kitchen with water on tap.

With the SportsRV, you now have a choice of 3 Annex sizes 2.4m wide Standard, 2.4m wide Extended or 2.6m wide Bedouin for the largest range in the Industry. There is also the 2m Kwik Awning for overnight stops. Canvas Mesh walls and windows can be added to the Annexe for complete privacy and weather protection.

The Sports RV has a “Rhino Tuff” sprayed on stone protector on the front of the Uni-Pod. It has been tested in difficult terrain with gibbers and bull dust.

The Sports RV has the kitchen including the cooker integrated into the slide out Stainless Steel kitchen. The refridgerator (up to 80litre) can be located in the Uni-pod.

All the Kimberley Canvas and Energy options are available for the sportsrv.

The sportsrv model has the same Camper "body", camper "tent", NEW Dual Layer mattress and Stainless Steel Kitchen Body (kitchen internals are different) that is used across the range of models

The 2008 Model Sportsrv can now take a boat loader (and swing away outboard carrier) - but needs the shock absorber and disc brakes upgrade.

Uni-Pod™

This single piece storage Pod is made of Fibreglass and lined inside with
Rhino Tuff
polyurethane lining. It has the option of our patented fan forced ventilation system so that a fridge/freezer will continue to operate inside the dust free pod. The lid is gas strut assisted and sealed. We use our Fatigue-Shield™ technology of using a Polyurethane Elastic Adhesive to mount this on an Alloy sub-frame then onto the front drawbar.

Seal-Tite™ Technology

We use a unique construction process of building high quality automotive pinchweld seals in a special combination at the critical hinge point and elsewhere throughout the kamper. The seals are all adjustable for wear and travel and will keep the kamper free of dust.

Deflecta-Shield™ System

We use a double point shield system: Under the camper, there is a steel stone deflecta shield. Above the chassis, the front deflecta is a "Rhino Tuff" coating applied to the front of the Uni-pod fibreglass material and side fenders.

Selecta-Swing-Away™

Our Chassis has on the drivers side rear a reinforced channel ready for the optional Selecta-Swing-Away™ carriers. These are attached through compression sleeves and have a cam adjustable swing mechanism with safety catch and stainless securing lock. There are 5 different carrier arm to select from:
Triple Jerry can holder in alloy frame and "Rhino Tuff" lined; Spare Wheel and single Jerry can holder in Galvanised steel; outboard motor carrier in galvanised steel; utility plate with posts of galvanised steel; 50mm receiver welded into central position of galvanised arm so a rear bicycle carrier can be located and interchanged with the rear of vehicle.

Quad-Pod™

The Quad-Pod can carry a large Quad Bike up to 350kg or 2 x Motor Bikes of approx 175kg each.
The Bike(s) can be loaded and unloaded from either side.

Clamshell-Pod™

The front Clashell-Pod house a 40Lt fridge and doubles up as a stone shield.

Major Credit Cards Accepted (merchant fees may apply)